Sony ECM-W3 2-Person Wireless Microphone System with Multi Interface Shoe

In practical monitoring terms, Capture two subject interviews and vlogs with your Multi Interface compatible Sony Camera through this Sony ECM-W3 2-Person Wireless Microphone System, using two microphone-equipped clip-on transmitters and a dual-channel Multi Interface Shoe receiver link. The system handles the capture analog or digital sound in a combined mix or on discrete channels, preserving flexibility during post-production. The receiver is ultracompact and has built-in 3.5mm TRS and USB-C feed ports. Two switches on the side enable you to choose separate or mixed channel capture and toggle between analog and digital feed modes. Toggle safety track capture to protect against unforeseen interruptions. An attenuator switch on the transmitter units prevents clipping.
 

Bluetooth Wireless Communication: Guide

The units communicate with one another via Bluetooth 5.3 low-energy LC3plus codec from up to 492' away. The Bluetooth LC3plus codec maintains low power consumption and low latency while maintaining high sound quality.
 

Multi connection panel Shoe

Use the receiver's built-in Multi Interface Shoe for cable-free link to your compatible Sony camera. The camera body can supply power to the receiver whenever attached. Audio is transmitted via direct digital signal for high-quality sound free of transmission deterioration.
 

Digital Sound recording production flow

Digital MEMS microphones with a high signal to noise ratio are built-in into each transmitter to capture detailed audio with low noise. You can eliminate distortion even additional through the built-in noise cut and low-cut filters. The noise cut filter uses digital signal processing to remove interference, while the low-cut filter lowers unwanted low-frequency noise such as wind, air conditioning units, and vibrations.
 

Clip-On Transmitter: Guide

• Noise cut filter, low-cut filter
• Three attenuation settings: 0, 10, or 20 dB
• 3.5mm TRS jack for external microphone input

 

Battery Life: Guide

• Each component features an integrated lithium-ion battery.
• The transmitters can operate for six hours at a time on a full charge.
• Use the included charging case to recharge the components when on the go.

Component construction

LED indicators on the receiver and transmitters indicate the communication status and enable you to monitor battery levels. All components are developed to be moisture and dust resistant for outdoor shooting. Included furry windscreens lower wind noise.
 
Locate us: https://goo.gl/maps/YZQmjfG5vYQS3ZLU7
buy it from