Libec NX-100MC Carbon Fiber Tripod System with NH10 Head, Mid-Spreader, Feet & Carry Case

Libec NX-100MC: Guide

Libec NX-100MC Carbon Fiber Support System with NH10 Assembly, Mid-Spreader, Feet & Carry Case accommodates your small camera rig supporting up to 8.8 lb and produce smooth pan and tilt motion with this .
The Libec NX-100MC arrangement incorporates the NH10 dual 75millimetres bowl/flat base video assembly, the RT20C carbon fiber support, the BR-2B mid-level spreader, a large rubber foot location, and a RC-20 transport case.
The base of the assembly fits the tripod's 75millimetres bowl, and it is additionally compatible with tripods with a flat fitting.
It provides uninterrupted pan/tilt drag and counterbalance, a snap-on/off fast release plate, an illuminated bubble level, and a pan bar.
The two-stage low-weight carbon fiber support weighs only 3.5 lb and can extend to a height of 60.6".
The mid-level spreader installs at the midpoint of the support to attach support to the rig, and a rubber foot location is supplied to maintain the legs consistent on flat or irregular surfaces. The transport case shops and transports the entire system.

Libec NH10 75mm Ball/Flat Base Video Head: Pan Handle (8.8 lb Payload)

Developed for compatibility small unit rigs supporting up to 8.8 lb, the NH10 75millimetres Ball/Flat base Video Assembly with Pan Handle from Libec incorporates an unified ball/flat mount configuration.
The base of the support can integrate either in a conventional 75millimetres bowl or on a flat fitting with a 3/8"-16 screw.
Having both choices provided means you can transfer the assembly from a support with a bowl fitting to a flat mount slider.
To achieve proper equilibrium, the NH10 head incorporates a snap-on/off unit plate that can slide up to 1.2" of fore/aft adjustment, and it integrates 1/4"-20 and 3/8"-16 camera mounting screw choices.
The screw and locating pin are moveable to orient the plate on the capture device to achieve the finest possible equilibrium.
Once the body is well-controlled, the uninterrupted counterbalance and pan/tilt drag settings deliver level movement.
On the side, there are 1/4"-20 and 3/8"-16 threads to fitting a selection of components such as a illumination, monitor, or extension arm.
Supplied with the NH10 is a pan accommodate that can be placed on the right or left side of the assembly by screwing it onto one of the mounts.
The LED-illuminated bubble level assists to level the unit on irregular surfaces, even in low illumination.

Libec RT20C 2-Stage Lightweight Carbon Fiber Tripod: 75mm Bowl — NX-100MC

Add a hardwearing, lightweight support to your imaging device rig with this RT20C 2-Stage Low-weight Carbon Fiber Support with 75millimetres Bowl from Libec.
The RT20C supplies a 75millimetres bowl mount for installation a wide selection of smooth heads.
The low-weight carbon fiber legs weigh only 3.5 lb. Secured by twist levers, the 2-stage legs deliver a height selection of 14.6 to 60.6".
This support does not incorporate rubber feet or a spreader, which can be purchased separately.

Libec RC-20 Carrying Case for NX-100C NX-300C Tripods: Guide — NX-100MC&

The Libec RC-20 Carrying Case is developed to transport Libec NX-100C and NX-300C tripods systems.
Made from a combination of materials that are resistant to water, use, and tearing, the case has a soft non-padded lining that makes it simple to insert and remove your support without scratching its finish.

Construction: Guide — NX-100MC

• Made of nylon, polyester, polypropene, polyethylene, acetal plastic & thermoplastic elastomer
• Combining multiple materials adds wear, water, and rip resistance
• Soft unpadded interior makes it easy to insert and remove tripod without marking or marring its finish
• Zipper closure

contact us
Visit us