Libec NX-100C Carbon Fiber Tripod System

Libec NX100C Support Arrangement
Libec  NX100C Carbon Fiber Support System with NH10 Assembly, Ground Spreader & Carry Case  accommodates your small body rig supporting up to 8.8 lb and produce smooth pan and tilt motion with this
The NX-100C arrangement incorporates the NH10 dual 75millimetres bowl/flat base video assembly, the RT20C carbon fiber support, the SP-1B terrain spreader, and a RC-20 transport case.
The base of the assembly fits the tripod's 75millimetres bowl, and it is additionally compatible with tripods with a flat fitting.
It contains uninterrupted pan/tilt drag and counterbalance, a snap-on/off fast release plate, an illuminated bubble level, and a pan bar.
The two-stage low-weight carbon fiber support weighs only 3.5 lb and can extend to a height of 60.6".
The terrain spreader installs at the starting of the support to attach stability to the rig. The transport case shops and transports the entire system.

Libec NH10 75mm Ball/Flat Base video signal Head wi)th Pan Handle (8.8 lb Payload

Developed for compatibility small camera rigs supporting up to 8.8 lb, the NH10 75millimetres Ball/Flat base Video Assembly with Pan Handle from Libec integrates an unified ball/flat mount configuration.
The base of the support can integrate either in a conventional 75millimetres bowl or on a flat fitting with a 3/8"-16 screw.
Having both choices provided means you can transfer the assembly from a support with a bowl fitting to a flat mount slider.
To achieve proper equilibrium, the NH10 head incorporates a snap-on/off unit plate that can slide up to 1.2" of fore/aft adjustment, and it incorporates 1/4"-20 and 3/8"-16 camera mounting screw choices.
The screw and locating pin are moveable to orient the plate on the body to achieve the finest possible equilibrium.
Once the body is well-controlled, the uninterrupted counterbalance and pan/tilt drag settings deliver level movement.
On the side, there are 1/4"-20 and 3/8"-16 threads to fitting a selection of components such as a illumination, monitor, or extension arm.
Supplied with the NH10 is a pan accommodate that can be placed on the right or left side of the assembly by screwing it onto one of the mounts.
The LED-illuminated bubble level assists to level the unit on irregular surfaces, even in low illumination.

Libec RT20C 2-Stage Lightweight Carbon Fiber Tripod: 75mm Bowl

Add a hardwearing, lightweight support to your body rig with this RT20C 2-Stage Low-weight Carbon Fiber Support with 75millimetres Bowl from Libec.
The RT20C includes a 75millimetres bowl mount for installation a wide selection of smooth heads.
The low-weight carbon fiber legs weigh only 3.5 lb.
Secured by twist levers, the 2-stage legs deliver a height selection of 14.6 to 60.6".
This support does not incorporate rubber feet or a spreader, which can be purchased separately.

Libec RC-20 Carrying Case for NX-100C NX-300C Tripods: Guide&

The Libec RC-20 Carrying Case is developed to transport Libec NX-100C and NX-300C tripods systems.
Made from a combination of materials that are resistant to water, use, and tearing, the case has a soft non-padded lining that makes it simple to insert and remove your support without scratching its finish.

Construction: Guide

• Made of nylon, polyester, polypropene, polyethylene, acetal plastic & thermoplastic elastomer
• Combining multiple materials adds wear, water, and rip resistance
• Soft unpadded interior makes it easy to insert and remove tripod without marking or marring its finish
• Zipper closure

Pockets: Guide

• Large main compartment holds a NX-100C or NX-300C tripod system
• Zippered exterior slip pocket
• Open exterior slip pocket

Carrying options: Guide

• Soft connecting carry handles
• Carry handles are located off-center for proper load balance with the tripod system inside
• Attached, adjustable shoulder strap
• Weighs just over a pound empty

contact us
Visit us