FREEFLY MōVI Pro Essentials Bundle

A Closer Look at FREEFLY MoVI Pro

FREEFLY M?VI Pro (Gimbal Only): Guide

Looking first at image acquisition, Central to FREEFLY's M?VI Pro system is the gimbal unit. Through the "Toad in the Hole" quick release system, this gimbal can be attached to handles, aerial platforms, or terrestrial vehicles for stable, professional shots. The M?VI Pro motorized gimbal stabilizer steadies cameras weighing up to 15 lb, rendering it compatible with mirrorless all the way up to smaller cinema cameras. With separately provided battery options, the camera and essential accessories can be powered without adding any bulk to the M?VI Pro via its D-Tap feed port.

powering Surge Firmware Update

The newest firmware update gives the MoVI Pro motor a power boost to increase camera control. Hold your top speed for longer and recover faster thanks to Maniac Setting 2.0, which increases time at peak torque for all three motors. The motor temperature estimator has been reengineered to sustain highest torque for longer while protecting the motors. On-screen display control can be facilitated via MoVI Controller whenever filming with the FREEFLY Ember, Panasonic BGH1, and Panasonic BS1H with the Entire Air Commander.

Versatile "Toad in the Hole" construction

The M?VI Pro is capable of turning 180° to quickly transition from upright to inverted mounting settings and transition from handheld to TERO-mounted configurations. Handle configuration options incorporate the RING Pro, skate, and classic settings. Mount the gimbal onto a drone and use the dual GPS units on the top and bottom for solid signal in both Sky or GroundView.

3-Axis optics operation

Constructed into the camera stage is a fully built-in lens control system. Use the onboard, long-range 2.4 GHz frequency hopping signal to connect to the separately provided MIMIC, M?vi controller, or a combination of the two.

RED RCP2 Integration: Guide

Access RED camera controls like focus, iris, ISO, and start/stop thanks to the built-in RCP2 control. Use the M?vi or MIMIC controller to refine those settings from hundreds of feet away.

Built-In Screen: Guide

• Gives the user quick access to important information
• Tune/adjust parameters on the fly without a phone or computer
• Enter majestic angle or time-lapse mode
• Pan, tilt, roll balancing, and stiffness
• Full stiffness and filter auto-tune in approximately 10 seconds

Improved Stability, Increased Torque: Guide

High-quality sensors with accurate calibration enable for smooth performance even during the most demanding shots with a 60 dB at 1 Hz disturbance rejection. The Pro provides twice the torque of previous gimbal motors thanks to its direct-drive brushless motors.

Compatibility and Power Capabilities

The dual battery plates are hot-swappable for easy replacement while shooting in the field. They are compatible with separately provided M?vi Pro, SL4-Ground, and TB50/55 batteries.Three D-Tap feeds and one USB feed on the gimbal deliver the camera and any attached accessories with power.

App operation

Tune and customize your gimbal in real time through the iOS and Android compatible M?vi Pro App. Configure your time-lapse settings and monitor battery status all from your phone, which is especially useful whenever your gimbal is mounted on the TERO vehicle or a high-powered drone.Compatibility

FREEFLY M?VI Ring Pro II: Guide

Do even more with your M?VI Pro by pairing it with the M?VI Ring Pro from FREEFLY. The carbon-fiber M?VI Ring Pro gives the attached gimbal a surrounding handgrip and doubles as its support stand. Integrated feet let an operator place the system down immediately between takes. On a level surface, the ring also supports balancing and setup of the M?VI Pro before remotely operated pan-and-tilt moves.
1.2"-diameter carbon fiber ringLightweight at 1.8 lbAdjustable and removable handstopsFiber-reinforced molded plastic feetRemovable top handleCompatible with M?VI Pro, M?VI Carbon, and M-series M?VI stabilizers
UPC: 742574250688

FREEFLY MoVI Pro Landing Gear Kit: Guide

Take your MoVI Pro setup to new heights with the MoVI Pro Landing Gear Kit from FREEFLY. This kit is developed to attach to your MoVI Pro stabilizer in roughly 5 minutes, giving it lightweight carbon and aluminum landing gear that can be used with the FREEFLY ALTA 6 or ALTA 8 multi-rotor UAV.
Once installed onto an ALTA drone, the entire landing gear structure will rotate along with the gimbal for an unrestricted panning field of view. The quick release feature for the 0.6" diameter legs lets you quickly transition from aerial shooting to ground/handheld shooting.
UPC: 635414908170

Carbon and FREEFLY SL4-Ground Lithium-Ion Battery for M?VI Pro

Power your M?VI Pro or Carbon gimbal stabilizer with this SL4-Ground Lithium-Ion Battery from FREEFLY. The battery integrates a rechargeable 86.4Wh lithium-ion configuration with a 21.6V nominal voltage. Depending on the camera and accessories you utilize with the rig, it has a total runtime of 2 to 5.75 hours and can recharge in just 70 minutes. The front panel of the battery provides a USB-C and proprietary ports for recharging or power extra devices, as well as a display for observation the battery's status.

Compatible Gimbals: Guide

FREEFLY M?VI ProFREEFLY M?VI Carbon
UPC: 742574252392

FREEFLY SL Battery Charger: Guide

Charge your SL4-Gound or SL8-Air battery, personal computer, or mobile device with this SL Battery Charger from FREEFLY. The charger contains a USB-C port which doubles as both a source and feed to supply power to your compatible battery or charge a personal device with a connected battery. A proprietary port connects to your SL4 or SL8 battery and can fully recharge either in 70 minutes or 2.5 hours. The charger has a source range of 9 to 20V and incorporates a USB-C cable for link to a separately provided wall adapter.

Integration Support — FREEFLY MōVI Pro

FREEFLY SL4-Ground batteriesFREEFLY SL8-Air batteries
UPC: 742574252668
Locate us: https://goo.gl/maps/YZQmjfG5vYQS3ZLU7