SKU: SWATEMTVSTDMC
BlackMagic Design ATEM Microphone Converter
BlackMagic Design ATEM Microphone Converter
In stock
View full details
WhatsApp us for inquiries
Whether you're extending a podcasting soundstage or you only need more microphones, the Blackmagic Design ATEM Microphone Converter permits audio-input expansion for your ATEM Television Soundstage by converting four analog XLR sources to MADI.
Fitted with two BNC MADI I/O ports, the Microphone Converter simply connects into the ATEM Television Soundstage MADI port, so there's no involved setup required—and extra units can even be daisy chained for more inputs.
The four XLR-1/4" combo analog sources are mic-/line-selectable and deliver 48V phantom power.
The ATEM Microphone Converter utilizes 32-little float electronic preamps and eight ADCs per source to capture clip-free, 24-bit / 48 kHz captures with an extremely low noise floor, a wide dynamic selection, while keeping distortion extremely low across both quiet and loud performances.
A practical HDMI feed with scrolling audio waveforms permits you to connect a screen to display the status of your audio.
USB and Ethernet ports enable for off-site admin and software updates through the ATEM Software Control app.
contact us
Visit us
Fitted with two BNC MADI I/O ports, the Microphone Converter simply connects into the ATEM Television Soundstage MADI port, so there's no involved setup required—and extra units can even be daisy chained for more inputs.
The four XLR-1/4" combo analog sources are mic-/line-selectable and deliver 48V phantom power.
The ATEM Microphone Converter utilizes 32-little float electronic preamps and eight ADCs per source to capture clip-free, 24-bit / 48 kHz captures with an extremely low noise floor, a wide dynamic selection, while keeping distortion extremely low across both quiet and loud performances.
A practical HDMI feed with scrolling audio waveforms permits you to connect a screen to display the status of your audio.
USB and Ethernet ports enable for off-site admin and software updates through the ATEM Software Control app.
HDMI Monitoring: Scrolling Audio Waveforms
- The ATEM Microphone Converter also includes an HDMI video monitoring output, so you can connect a simple TV or computer monitor for a full status display.
- It enables you to display four scrolling waveforms over the last 60 seconds of recording time, which is informative to watch.
- There are also audio meters to show the levels at the input connectors.
- Each channel also includes a custom label set via the software utility.
- There are also indicators to show the switch settings for mic-/line-input selection and phantom power.
- Plus if you daisy-chain converters, the monitoring output will adapt and display more than four channels.
- You can even set a converter name that will be displayed on the monitoring.
contact us
Visit us
Key Features
- Audio Inputs for ATEM Television Studio
- Connects to Switcher via MADI
- 4 XLR-1/4" Combo Mic/Line Inputs, +48V
- 32-Bit Float Digital Preamps
- 8 ADCs/Channel, 24-Bit / 48 kHz Audio
- Easy-to-Use, No Setup Required
- 64-Channel MADI Digital Audio I/O Ports
- HDMI Monitor Out
- USB-C and Ethernet Ports
Shop by Categories
Explore other brands
