{"product_id":"rode-wireless-go-gen-3-2-person-compact-digital-wireless-microphone-system-recorder-2-4-ghz-black","title":"RODE Wireless GO (Gen 3) 2-Person Compact Digital Wireless Microphone System\/Recorder (2.4 GHz, Black)","description":"\u003ch2\u003eA Closer Look at RODE Wireless Go Gen 3 2-Person Compact Digital Wireless Microphone System\/Recorder (2.4 GHz, Black)\u003c\/h2\u003e\u003cbr\u003eAcross its imaging platform, with more powerful features that are easier to operate than before, the black RODE Wireless GO (Gen 3) system lets videographers, vloggers, and mobile journalists quickly and confidently capture two on-camera personalities to a mobile device or camera and get professional sounding, broadcast-ready results.\u003cbr\u003eBoasting secure Series IV 2.4 GHz digital transmission, easy operability, transmitters with built-in mics (lavalier mics provided separately), and a dual-channel receiver, the system is ready to go at the press of a button; you can focus on getting the shot knowing that the Wireless GO is delivering quality audio at a range of up to 853 feet. What's more, the addition of 32-bit float backup capture eliminates digital clipping, delivering an extra layer of security. There are no menus and no finicky dials, just simple power-on-and-go operation and a bright, informative LCD screen, showing you what you need to see. Whenever you're ready for more, use the Rode Central companion app to access a powerful feature set and extended customization of settings.\u003cbr\u003e\u003ch3\u003eThird-Generation Upgrades: Guide\u003c\/h3\u003e\u003cbr\u003e\u003cstrong\u003e32-bit float capture:\u003c\/strong\u003e the enormous dynamic range provided by the 32-bit float backup capture on the transmitters means you never have to worry about digital clipping. As long as the signal isn't coming in too loud for the microphone, you can rest assured that the transmitter's digital capture will be pristine. In addition, low-level captures can be normalized to usable levels without adding noise.Longer capture time: with 32GB of memory, each transmitter is capable of up to 40 hours of 32-bit float backup capture.\u003cbr\u003e\u003cstrong\u003eUpgraded mics:\u003c\/strong\u003e the built-in mics on the transmitters have been upgraded and now feature the same ones as the Wireless PRO versions for improved clarity and intelligibility with less risk of overloading at the capsule, helping to maintain the cleanest possible audio at the point of capture.\u003cbr\u003e\u003cstrong\u003eLocking 3.5mm mic sources:\u003c\/strong\u003e the transmitters now sport locking 3.5mm source jacks for extra security whenever using outboard lavalier mics (outboard mics provided separately).\u003cbr\u003e\u003cstrong\u003eIntelligent GainAssist:\u003c\/strong\u003e RODE's smart GainAssist technology automatically sets the receiver's feed levels to your camera based on how loud your subject is, eliminating the guesswork and freeing you up to focus on making great content. Of course, you can choose to manually refine the feed levels with a 30 dB range at your disposal. Gain presets for a range of cameras are additionally provided.\u003cbr\u003e\u003cstrong\u003eExtended range:\u003c\/strong\u003e the third-generation Wireless GO provides updated Series IV wireless technology, delivering a whopping 853' wireless transmission range from the transmitters to the receiver compared to the 656' highest range of the Wireless GO II. It additionally supplies increased signal strength in crowded wireless settings. Plus, the system is developed to run both transmitters without affecting the range performance.\u003cbr\u003e\u003cstrong\u003eHeadphone observation:\u003c\/strong\u003e with a high-power headphone amp constructed into the receiver, you can connect a pair of headphones to the 3.5mm feed jack and monitor both of your transmitters as they capture.\u003cbr\u003e\u003cstrong\u003e3.5mm TRRS feed jack:\u003c\/strong\u003e the receiver's TRRS feed jack means you can connect a third mic via this jack when using the system's USB output for recording. The extra mic could be a headset mic or a lavalier that handles TRRS interfacing.\u003cbr\u003e\u003cstrong\u003eImproved display:\u003c\/strong\u003e enjoy improved clarity and definition from the receiver's upgraded display. This makes it easier than ever to check your levels and see the capture status and other key information immediately.\u003cbr\u003e\u003cstrong\u003eDedicated capture buttons:\u003c\/strong\u003e each transmitter makes available a dedicated capture button, giving you complete control over when recording starts and stops.\u003cbr\u003e\u003ch3\u003ePowerful capabilities\u003c\/h3\u003e\u003cbr\u003eClip each miniature transmitter to clothing, attach it to a belt, or slide it in a pocket; use it as a lavalier mic (no need for a separate mic), or operate it as a traditional bodypack transmitter with an outboard lav mic such as the Rode Lavalier II (provided separately).Thanks to the receiver's minute form factor and built-in clip, the device delivers the flexibility to be easily mounted on a camera, in a sound bag, or to a mobile device. Its bright, high-contrast display shows battery status for the receiver and transmitter, audio level, signal strength, and more.\u003cbr\u003eUse the Rode Central companion app (Mac, Windows, iOS, and Android compatible) to unlock powerful features and device customization—onboard transmitter capture, configurable safety track capture in dual mono setting, file playback and export, and more.\u003cbr\u003eSince the Wireless GO can handle two transmitters at once, it contains the ability to switch between stereo or dual-mono feed modes. As a result, this permits each transmitter, and therefore each subject, to be recorded to a separate channel. Alternatively, signal from both transmitters can be mixed together and recorded identically to left and right channels. Use the app to activate safety track capture (-10 dB on the right channel).\u003cbr\u003eIn addition to the traditional 3.5mm TRRS analog feed for headphone observation or camera link via the included SC2 TRS to TRS cable, the Wireless GO receiver has a USB-C digital audio feed for operation as a digital audio interface. This can be connected to a computer or mobile device with the supplied SC22 USB-C to USB-C cable or to the Lightning port of an iOS mobile device via the supplied SC21 Lightning cable.\u003cbr\u003e\u003ch3\u003eExtensive Customization Options: Guide\u003c\/h3\u003e\u003cbr\u003eAlways capture mode: whenever this setting is activated, the transmitter will start capturing audio as soon as it is switched on. It will continue recording until it is switched off, regardless of the status of the receiver. This means that you will have a continuous capture from the moment the transmitter is switched on, making this setting suitable when using the Wireless GO as a standalone field recorder.Manual capture mode: in this setting, on-board captures are started and stopped whenever you press the capture button on the transmitter.\u003cbr\u003eOff: switching off the capture function means the transmitter will not capture any audio. Existing captures will remain on the unit until manually deleted through Rode Central.\u003cbr\u003eActivatable source pads on the transmitters engage low-sensitivity setting to avoid distortion whenever dealing with loud talkers.\u003cbr\u003eLED brightness adjustment for the transmitters enables optimal visibility in any shooting setting.\u003cbr\u003e\u003ch3\u003eTrue Wireless Microphone Ready for Run-and-Gun: Guide\u003c\/h3\u003e\u003cbr\u003eEquipped with a high-caliber, pre-polarized, omnidirectional lavalier constructed into the transmitter's space-efficient housing, the Wireless GO (Gen 3) produces quality audio without demanding a separate microphone (outboard lavalier mics optional).The onboard capsule's omnidirectional polar pattern maintains dependable audio pickup, even if mic placement is less than ideal; your subject's voice will be captured with clarity, intelligibility, and consistency.\u003cbr\u003eAlready have an outboard lav? The transmitter packs in a 3.5mm TRS source with plug-in power, so you can connect most lavalier mics equipped with a locking 3.5mm TRS mini plug (such as Rode's own Lavalier II, provided separately), and still enjoy the convenience of the Wireless GO.\u003cbr\u003eThe 3.5mm TRS outboard mic source passes wideband audio along to the onboard mic preamp, which requires no settings adjustment.\u003cbr\u003e\u003ch3\u003eSecure and Sonically Solid\u003c\/h3\u003e\u003cbr\u003eLike Rode's popular RODELink wireless systems, the Wireless GO system utilizes the 2.4 GHz frequency band to get you away from the confusing and often congested UHF spectrum. Forget about scanning for channels and dialing in squelch to get a strong signal; the Wireless GO just works!Courtesy of Rode's optimized transmission algorithm, the Wireless GO (Gen 3) empowers you with a line-of-sight range of up to 853 feet, and it bolsters signal dependability to mitigate drop-outs in crowded short-range settings such as retail stores, malls, office buildings, and hotels.\u003cbr\u003eRode's Series IV 2.4 GHz digital transmission incorporates 128-bit encryption for security, stability, and hassle-free operation while bypassing the frustration of dealing with licenses and frequency mandates. Go anywhere in the world with the Wireless GO; it automatically gives you a strong signal no matter the scenario.\u003cbr\u003eNote: For optimal performance from this 2.4 GHz system, operators are encouraged to maintain as direct a line of sight as possible between the transmitter and receiver.\u003cbr\u003e\u003ch3\u003eWorks: Rode Connect\u003c\/h3\u003e\u003cbr\u003eThe Wireless GO can be fully built-in with Rode Connect software, allowing you to capture broadcast-grade sound for your content with more freedom and flexibility than ever before, well suited to IRL streaming and recording presentations or classes, and more.Using the Wireless GO with Rode Connect is additionally ideal for podcasting uses where you require the freedom of wireless audio, from recorded interviews to casual podcasting setups.\u003cbr\u003eRode Connect enables two Wireless GOs to be connected to a single computer. Each transmitter can be allocated to its own channel for a total of four separate wireless audio streams, each with an individual level meter as well as solo and mute buttons. The Wireless GO III can additionally be used in conjunction with the NT-USB Mini inside Rode Connect.\u003cbr\u003e\u003ch3\u003eAdditional capabilities\u003c\/h3\u003e\u003cbr\u003e\u003cul\u003e    \u003cli\u003eThe receiver's 3.5mm TRS output sends a mic-level signal, making it compatible with an array of devices such as DSLRs and portable audio recorders.\u003c\/li\u003e    \u003cli\u003eA 3-stage level control (0, -12, or -24 dB) on the receiver allows simple and effective optimization of signal levels. Use the app to adjust the level in 3 dB increments from 0 to -30 dB.\u003c\/li\u003e    \u003cli\u003eView transmitter and receiver battery levels on the receiver's bright, high-contrast display.\u003c\/li\u003e    \u003cli\u003eInternal lithium-ion polymer batteries offer up to seven hours of battery life to handle long shoots.\u003c\/li\u003e    \u003cli\u003eThe receiver features plug-in power detection. If your camera offers plug-in power, the receiver will automatically switch to it and conserve battery life. The receiver will automatically power on\/off with your camera.\u003c\/li\u003e    \u003cli\u003eUSB-C ports for battery recharging, powering via external USB battery packs (available separately), and firmware updates.\u003c\/li\u003e    \u003cli\u003eEasily recharge over lunch and dinner breaks—go from empty to a full charge in just two hours.\u003c\/li\u003e    \u003cli\u003eIncludes an SC33 charging hub for simultaneously charging the transmitters and receiver.\u003c\/li\u003e    \u003cli\u003eIncludes three furry windshields to minimize noise from wind and rustling clothes. These feature a secure screw-lock bayonet attachment method to eliminate slippage.\u003c\/li\u003e    \u003cli\u003eAdd on-the-go powering with the Charge Case+ (available separately) which provides two full system recharges for a total of 21 hours of use without AC power.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cbr\u003eLocate us: \u003ca href=\"https:\/\/goo.gl\/maps\/YZQmjfG5vYQS3ZLU7\"\u003ehttps:\/\/goo.gl\/maps\/YZQmjfG5vYQS3ZLU7\u003c\/a\u003e","brand":"Rode","offers":[{"title":"Default Title","offer_id":45790100586549,"sku":"WIGOGEN3","price":1199.0,"currency_code":"AED","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0719\/3290\/3477\/files\/Rode-Go-Gen-3.webp?v=1784711497","url":"https:\/\/bsn.com.pk\/products\/rode-wireless-go-gen-3-2-person-compact-digital-wireless-microphone-system-recorder-2-4-ghz-black","provider":"Broadcast Systems Network","version":"1.0","type":"link"}